انت هنا الان: الرئيسية » القسم الاكاديمي
المقالات الاكاديمية والبحثية

ANCHORAGE STRENGTH OF REINFORCING BARS WITH STANDARD HOOKS

    لتحميل الملف من هنا
Views  154
Rating  0
 علي حسين عبيد محمد عجام 02/01/2018 11:37:32
تصفح هذه الورقة الالكترونية بتقنية Media To Flash Paper

ABSTRACT
Hooked bars are often used to anchor reinforcing steel where concrete dimensions are not
sufficient to provide the required development length for straight reinforcement, such as in external
beam-column joints. The purpose of this study is to expand the understanding of the behavior of
hooked bars in high-strength concrete and to develop design guidelines allowing for the use of
high-strength reinforcing steel and high-strength concrete. In this study, 122 simulated beamcolumn
joints were tested as a continuation of previous work at the University of Kansas. The test
parameters included bar size (No. 5, No. 8 and No. 11), hook bend angle (90° or 180°), embedment
length (5.5 to 23.5 in.), amount of confining reinforcement within the joint (no confining
reinforcement to nine No. 3 hoops), location of the hooked bar with respect to member depth,
hooked bar stresses (22,800 to 138,800 psi), concrete compressive strength (4,490 to 14,050 psi),
center-to-center spacing between hooked bars (2 to 11.8db), number of hooked bars (2, 3, 4, or 6),
arrangement of hooked bars (one or two layers), and ratios of beam effective depth to embedment
length (0.6 to 2.13). Some specimens contained strain gauges mounted along the straight portion
of the hooked bars and on the confining reinforcement within the joint rejoin. Test results from
this study, along with test results from earlier work covering specimens without and with confining
reinforcement, concrete compressive strengths between 2,570 and 16,510 psi, and bars stresses at
anchorage failure ranging from 22,800 and 144,100 psi, were used to develop descriptive equations
for the anchorage strength of hooked bars.
The results of this study show that the current Code provisions overestimate the
contribution of the concrete compressive strength and the bar size on the anchorage strength of
hooked bars. The incorporation of the modification factors for cover and confining reinforcement
in the provisions in the ACI Building Code (ACI 318-14) produces an unconservative estimation
of anchorage strength of hooked bars, particularly with large hooked bars and closely-spaced
hooked bars (hooked bars with center-to-center spacing less than 6db). Closely-spaced hooked bars
exhibit less anchorage strength than widely-spaced hooked bars. The reduction in anchorage
strength of closely-spaced hooked bars is a function of both the spacing between hooked bars and
the amount of confining reinforcement. Both the hooks and the straight portion of hooked bars
contribute to anchorage strength. The anchorage strength of staggered hooked bars can be
ii
represented by considering the minimum spacing between the bars. Hooked bars anchored in
beam-column joints with ratio of beam effective depth to embedment length greater than 1.5
exhibit low anchorage strengths compared to hooked bars with a ration below 1.5. These
observations are used to develop proposed Code provisions for the development length of
reinforcing bars anchored with standard hooks. The proposed provisions provide a higher level of
reliability than current provisions and can be used for reinforcing steels with yield strengths up to
120,000 psi and concretes with compressive strengths up to 16,000 psi.

  • وصف الــ Tags لهذا الموضوع
  • anchorage, beam-column joints, bond and development, concrete, high-strength concrete, high-strength steel, hooks, closely-spaced hooks, staggered-hooks, reinforcement, reinforcement strain

هذه الفقرة تنقلك الى صفحات ذات علاقة بالمقالات الاكاديمية ومنها الاوراق البحثية المقدمة من قبل اساتذة جامعة بابل وكذلك مجموعة المجلات العلمية والانسانية في الجامعة وعدد من المدنات المرفوعة من قبل مشرف موقع الكلية وهي كالاتي:

قسم المعلومات

يمكنكم التواصل مع قسم معلومات الكلية في حالة تقديم اي شكاوى من خلال الكتابة الينا,يتوجب عليك اختيار نوع الرسالة التي تود ان ترسلها لادارة الموقع :